Deskripsi Drilling And Well Construction
Drilling and well construction (probably one of the most expensive features of a geothermal direct use project) is often the least understood. This training will provides the basics of Equipment and methods used for drilling and completion of geothermal wells. It provides data needed by architects, engineers, and consultants to assist them in specification writing, selection of contractors, and drilling and completion inspection.
Most direct use geothermal wells can be drilled using conventional water well technology and equipment. Most of the wells will produce water at temperatures less than boiling and without artesian flow at the surface; however, some will be hotter or will flow. Blowout preventers and other sophisticated safety equipment are not usually required; however, this does not mean that there are not significant Safety considerations that should be addressed. Many of the wells have water above 140 0 F and this will scald. Public and drilling crew safety must be ensured. The cementing portion may appear to be overly detailed and long. However, the author’s view is that, all too often, Cementing is considered simply as a means of plugging up the annulus between the casing and borehole wall. Little attention is paid to methods and materials, and a poor cement job is the result. This can result in lost production zones, cold water leaking into production zones, geothermal water leaking into freshwater zones, and reduced useful well life. Also, in view of the increasing awareness and concern about inter-zonal Migration and possible fresh water aquifer contamination, proper cementing is of increasing importance.
Course Outline Pelatihan Drilling And Well Construction
- Drilling Equipment
- Cable Tool
- Rotary Drilling
- Other Thypes of rotator drilling
- Downhole harmer
- Reverse circulation
- Drill through casing driver
- Dual tube reverse circulation
- Core Drilling
- Directional Drilling
- Drilling Fluids
- Long Circulation
- Drilling Muds
- Density
- Viscosity
- Sand content
- Filter cake
- Gelling
- Lost circulation materials
- Recognizing geothermal zones
- Polymer fluids
- Air based Fluids
- Plumbness and Alignment
- Well Design
- Casing Materials
- Grouting and Cementing
- Blow out Prevention Equipment
- Injection wells
- Well Specifications
- BID sheets
- Well Costs
Peserta Pelatihan Drilling And Well Construction
Senior operational and engineering personnel involved in drilling / workover operations; OIMs, Drilling Superintendents, Drilling Engineers, Drilling Supervisors.
Jadwal Pelatihan
- 20-22 Januari 2026
- 10-12 Februari 2026
- 3-5 Msret 2026
- 21-23 April 2026
- 19-21 Mei 2026
- 9-11 Juni 2026
- 7-9 & 28-30 JuIi 2026
- 19-21 Agustis 2026
- 15-17 September 2026
- 13-15 Oktober 2026
- 3-5 & 17-19 November 2026
- 1-3 & 15-17 Desember 2026
Lokasi & Investasi Fasilitas
- Yogyakarta
- Jakarta
- Bandung
- Bali
- Surabaya
- Malang
- Batam
- Lombok- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)*
- FREE Transporsi Peserta ke tempat pelatihan*
- Module atau Handout
- FREE Flashdisk
- Sertifikat
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2x Coffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
- Training room full AC and Multimedia
*Syarat Ketentuan berlaku
Catatan : Hotel untuk pelatihan ada beberapa pilihan seperti Hotel Ibis, Hotel Aston, Hotel Amaris, Hotel Cavinton, Hotel Hyatt, Hotel Grand Aston, Novotel, Hotel Harris, Hotel 101, Hotel Grand Mercure,Ritz Carlton, Hotel Ibis Style dan masih banyak pilihan menarik lainnya.
Apabila perusahaan membutuhkan paket in house training anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan. Dapatkan harga spesial untuk pengiriman minimal 3 peserta dari perusahaan yang sama. Serta untuk pengiriman 3 pesertas dari perusahaan yang sama kita bisa membantu pelatihan special class tersendiri.
Informasi lebih lanjut bisa menghubungi kami di 0813 9174 4475 / informasi.diklatindonesia@gmail.com