Selamat Datang di Situs Kami
Pelatihan Advanced Production Operations For Oil & Gas , Training Advanced Production Operations For Oil & Gas
Posted By Putri
Pelatihan Advanced Production Operations For Oil & Gas

Pelatihan Advanced Production Operations For Oil & Gas

Pelatihan Advanced Production Operations For Oil & Gas, The rapidly increasing worldwide demand for natural gas as an energy source requires expertise in gas engineering technology. Incorporating a balance between theory and application, course emphasis is on training participants for immediate application of acquired techniques to field problems.
Production is defined as the operations involved in bringing well fluids to the surface and preparing the fluids for transport to a refinery via pipelines or trucks. The first step in production is to start the well fluids flowing to the surface (called “well completion”). Well servicing and workover consists of performing routine maintenance operations (such replacing worn or malfunctioning equipment) and performing more extensive repairs, respectively. Well servicing and workover are an intermittent step and necessary to maintain the flow of oil and gas. Next, the fluid must be separated into its components of oil, gas, and water; stored; and treated (for purification), measured, and tested before being transported to the refinery.
This training will provide the principle and yet some practical and theoretical aspect that can be applied on daily work faced by production engineers and supervisor in the oil industry.

Objective 

All aspects of completions are covered in sufficient detail to permit participants to review his/her current practices The fundamental concepts of production operations and their proper application in the field Production equipment such as wellhead, tubing and packers, well completions and workover as well as well test and problems, production logging and cementing will also covered Production logs and how and when to use them; evaluation techniques for cement bond logs and pulse echo tools

  1. Learn how to plan and implement well completions, workovers, stimulation treatments, and routine production operations with an efficiency that increases profits
  2. Learn about the role of rock mechanics in completions, stimulation, and workovers
  3. Be able to give suggest or discover the procedures and techniques that increase production and cut operating costs
  4. Be Able to identify and implement production improvement opportunities that can be carried out by either rig or non-rig well interventions
  5. Implementation of appropriate technology, either from internal or external sources, in well design, whilst ensuring that the well value is maximized

Outline 

1. GEOLOGICAL CONSIDERATION

  • Formation Rock
  • Primary and Secondary Migrations
  • Reservoir Traps

2. RESERVOIR FUNDAMENTALS THEORY

  • The Nature of Rocks and Fluids
  • Porosity and Permeability
  • Productivity Index
  • Volumetric Calculation
  • Other Calculations and Decline Curves

3. FLUID FLOW

  • Well Productivity
  • Choke and Reservoir Fluids
  • Inflow and Outflow

4. PRODUCTION OPERATIONS

  • Well head and Well Head EquipmentMultiple Orifice
  • Routine Operations
  • Opening and Shut-in Well Procedure

5. WELL TESTING AND SATELLITE SYSTEM

  • Test Separator Operations and Equipments
  • Gas Systems Instruments
  • Flare System and Depressurizing
  • Pigging Techniques and Procedures Sampling and Analysis
  • BS & W and API Gravity Measurement
  • Protective Steam Tracing

6. SURFACE PRODUCTION OPERATIONS

  • Process, Level, Temperature and Pressure Controls
  • Oil treating , Heater treater and Dehydrator
  • Separators, Stage Separators and Sizing
  • Two-phase and Three-phase Separation Skimmer tank and Flotation unit

7. WELL PROBLEMS

  • Low Production and Formation Damage
  • Low Reservoir
  • Plug-in Tubing or Perforations
  • High Viscosity
  • High Back Pressure
  • Inadequate Artificial Lift
  • Water Production and Mechanical Problem
  • Protective Steam Tracing

8. PRODUCTION LOGS

9. WELL COMPLETIONS

10. PRIMARY CEMENTING AND SQUEEZE CEMENTING

11. FLUID COMPLETIONS

12. SAND CONTROL

  • Gravel Pack,
  • Resin and Fraspac

13. WORKOVERS

14. PARAFFIN AND ASPHALTENES

  • hemical analysis
  • Precipitation Mechanism
  • The wax and Paraffin Problems

15. OIL EMULSIONS

  • Emulsion Built-up and Emulsifying Agent
  • Sampling and Analysis
  • Emulsion Treating
  • Heat and Chemical Treatment
  • Electrostatic Coalescing

16. SCALE PROBLEMS

  • Scale Composition, Prediction and Identification
  • Mechanic and Chemical methods
  • Scale Prevention and Inhibitors

17. CORROSION PREVENTIONS

  • Basic Theory
  • Detection and Measurement
  • Prevention and Material Used
  • Coating and Chemicals
  • Cathodic Protections and inhibitors
Jadwal Pelatihan
- 2 sd 4 Januari 2020
- 13 sd 15 Februari 2020
- 27 sd 29 Maret 2020
- 17 sd 19 April 2020
- 7 sd 9 Mei 2020
- 12 sd 14 Juni 2020
- 17 sd 19 Juli 2020
- 14 sd 16 Agustus 2020
- 12 sd 14 September 2020
- 16 sd 18 Oktober 2020
- 21 sd 23 November 2020
- 26 sd 28 Desember 2020

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi & InvestasiFasilitas
- Yogyakarta (6.500.000 IDR / participant)
- Jakarta (6.500.000 IDR / participant)
- Bandung (6.500.000 IDR / participant)
- Bali (7.500.000 IDR / participant)
- Surabaya (6.000.000 IDR / participant)
- Malang (7.000.000 IDR / participant)
- Batam (7.500.000 IDR / participant)
- Lombok(7.500.000 IDR / participant)
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
- FREE TransporsiPeserta ke tempat pelatihan .
- Module atau Handout
- FREE Flashdisk
- Sertifikat
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2x Coffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
- Training room full AC and Multimedia

Catatan : Hotel untuk pelatihan ada beberapa pilihan seperti Hotel Ibis, Hotel Aston, Hotel Amaris, Hotel Cavinton, Hotel Hyatt, Hotel Grand Aston, Novotel, Hotel Harris, Hotel 101, Hotel Grand Mercure,Ritz Carlton, Hotel Ibis Style dan masih banyak pilihan menarik lainnya.

Apabila perusahaan membutuhkan paket in house training anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan. Dapatkan harga spesial untuk pengiriman minimal 3 peserta dari perusahaan yang sama. Serta untuk pengiriman 3 pesertas dari perusahaan yang sama kita bisa membantu pelatihan special class tersendiri.

Informasi lebih lanjut bisa menghubungi kami di 0813 9174 4475 /  informasi.diklatindonesia@gmail.com

Leave a comment

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *